|
|
|||||||||
|
|
|
|
|
||||||
 |
FloWax |
|
|
|
|
The FloWax
software developed by Infochem has five main features:
The thermodynamic wax model predicts the WAT and amount of wax that comes out of solution. As the temperature cools below the WAT, the thermodynamic model predicts that increasing amounts of wax will precipitate. Deposition models predict whether the precipitated wax will deposit on a surface, such as a pipeline wall, and common outputs are temperature and pressure drop and the location and rate of wax build up. Deposition models can also be used to assess prevention and remediation strategies, such as insulation effectiveness and pigging frequency. For more information please see our Wax deposition leaflet. |
|
| For further information please contact: Dr Beryl Edmonds, Infochem Computer Services Ltd, 13 Swan Court, 9 Tanner Street, London SE1 3LE, UK Tel: +44 20 7357 0800 Fax: +44 20 7407 3927 Email: marketing@infochemuk.com Please send comments and suggestions about our website to info@infochemuk.com This page was last revised in May 2006. |